Skip to content
quoxcli

Mark a phase done

Machine verified A machine ran this on our install and checked the result against the CLI. A test report is linked. CLI 0.3.1, checked 2026-10-15.

Is this phase done?

Tell Quox a phase of a roadmap stream is finished, then read the stream and tick phases yourself.

What you get: a roadmap that moves when you say so. One sentence ticks the phase, and the stream shows its new progress straight away.

Ask Quox

Section titled “Ask Quox”

Name the stream and the phase in your own words:

quox · talking to Quox

On the QuoxPlan test stream proof-seed, mark phase 1 as done.

▤ AOCL │ L1 identity complete · allowed · 2ms

▤ AOCL │ L3 policy gate complete · proceed · 7ms

◐ PLAN │ stream brief ✔ PLAN │ stream brief │ ok · 4.6s

◐ PLAN │ tick phase ✔ PLAN │ tick phase │ Phase 1 ("proof fixture phase one") on proof-seed set to DONE. · 1.5s

⛓ AEE │ envelope opened · stream_success

Phase 1 ("proof fixture phase one") on proof-seed is now DONE. Both phases on the stream
are complete.

The stream itself is still BLOCKED. Ticking a phase doesn't change that, and I haven't
touched the stream's status. Completing the stream needs owner approval.

17.3s · 2 tools · 0 approvals

A real turn on our own install (CLI 0.3.0, 17 Oct 2026), replayed at speed. Names changed. Type the same words into quox.
✔ Machine verified against the CLI on 17 Oct 2026 · test report mvc1k8

Quox read the stream first, then ticked phase 1. It left the stream’s own status alone, because marking a whole stream complete needs the owner’s word.

Do it yourself

Section titled “Do it yourself”

1. Read the stream

Section titled “1. Read the stream”
stream 
quox plan show proof-seed proof-seed  Proof engine seed stream (test only)◆ BLOCKED  tier 3  #1 Phases  ■ 1.  proof fixture phase one Notes  2026-10-15T02:58:55.453Z proof engine note 33c8cc  2026-10-14T22:51:36.647Z proof engine note 98a133  2026-10-14T22:35:07.067Z proof engine note 88abd4
From a real run on our own install, on its test stream. Latest notes shown.

The header gives the status and tier. Each phase has a number, which is what you tick.

2. Tick the phase

Section titled “2. Tick the phase”

quox plan phase proof-seed tick 1 marks phase 1 done. Use your own stream id and phase number.

3. Leave a note

Section titled “3. Leave a note”

quox plan note proof-seed "phase one signed off" adds a line to the notes timeline. Notes are only ever added, never replaced.

What just happened

Section titled “What just happened”

Quox changed one phase on one stream, on your own Quox, with your permissions. The change is in the stream’s history, so anyone reading the stream sees when it moved.

Check it yourself

Section titled “Check it yourself”

quox plan show <streamId> prints the phases checklist again, and quox plan focus lists what is blocked, in flight or waiting on a decision across the roadmap.

Undo

Section titled “Undo”

quox plan phase <streamId> untick 1 puts the phase back to not done. To finish a whole stream, quox plan status <streamId> COMPLETE --confirm-owner is the owner’s call, which is why Quox did not do it for you.

Next

Section titled “Next”