Skip to content
quoxcli

Check whether a website is up

Machine verified A machine ran this on our install and checked the result against the CLI. A test report is linked. CLI 0.3.1, checked 2026-10-17.

Is my site up?

Ask whether a website answers right now: status, speed and certificate. Then run the same check yourself.

What you get: a straight yes or no on whether a site is answering, with the status code and how long it took.

Ask Quox

Section titled “Ask Quox”

Ask in plain words:

quox · talking to Quox

Is https://quox.ai responding right now? Check it.

▤ AOCL │ L1 identity complete · allowed · 1ms

▤ AOCL │ L3 policy gate complete · proceed · 5ms

◐ DELEGATE │ delegate_to_agent agent_id=beacon ✔ DELEGATE │ delegate_to_agent agent_id=beacon │ 1 tools used, 1 tool outcomes · 16.5s

⛓ AEE │ envelope opened · stream_success

Yes, https://quox.ai is up. I asked our uptime specialist, Beacon, to check it just now.

• Status: 200 OK
• Response time: 469 ms
• TLS and errors: none. The HTTPS request completed cleanly, with no certificate or
  connection problems.

There's nothing to act on. I can keep watching it or check it again if you want.

26.3s · 1 tool · 0 approvals

A real turn on our own install (CLI 0.3.0, 17 Oct 2026), replayed at speed. Names changed. Type the same words into quox.
✔ Machine verified against the CLI on 17 Oct 2026 · test report mvcnp7

Quox asked BEACON, the uptime agent, to check the site. It reported the status code, the response time and that the HTTPS connection was clean.

Do it yourself

Section titled “Do it yourself”

Run the same uptime check. It takes a list of addresses, so you can check several at once:

uptime 
quox tool exec uptime_check --input '{"urls":["https://quox.ai"]}' --select responseHere is exactly what the uptime check returned (source: uptime_check). **https://quox.ai is up.** | Field | Value ||-------|-------|| URL | https://quox.ai || HTTP status | 200 || Latency | 756 ms || Healthy | yes | Summary: 1 checked, 1 healthy, 0 unhealthy. Nothing was changed, this was a read-only probe.
From a real run on our own install, later the same day as the conversation above. The check runs through BEACON, so the reply is BEACON's summary of the tool's result.

Pass "urls" as a list, even for one address. --select response keeps just the answer.

What just happened

Section titled “What just happened”

Quox sent one request to the address and reported what came back. Nothing on the site was changed.

Next

Section titled “Next”