Skip to content

List your DPIAs

Machine verified A machine ran this on our install and checked the result against the CLI. A test report is linked. Proven against quoxcli 0.5.0 on 2026-11-06.

Which DPIAs do I hold?

Ask which data protection assessments you have and where each one stands, then read them yourself.

What you get: every data protection impact assessment (DPIA) on file, with its status, in a table you can hand to whoever asks.

Ask in plain words:

quox · talking to Quox

List our DPIAs (data protection impact assessments) with the processing activity name and status of each.

▤ AOCL │ L1 identity complete · allowed · 0ms

▤ AOCL │ L3 policy gate complete · proceed · 3ms

◐ COMPLIANCE │ read ✔ COMPLIANCE │ read │ 10 dpias · 1.5s

⛓ AEE │ envelope opened · ops.tool · compliance_read ok

⛓ AEE │ envelope opened · stream_success

You have 10 DPIAs, and all of them are still in draft. Every one looks like test data
from the proof harness, not a real processing activity.

Processing activity │ Status │ Version │ Last updated
────────────────────┼────────┼─────────┼─────────────
proof-dpia-seed     │ draft  │ 6       │ 2026-10-19
proof-dpia-77e237   │ draft  │ 1       │ 2026-10-19
proof-dpia-606ada   │ draft  │ 1       │ 2026-10-19
proof-dpia-6bc12d   │ draft  │ 1       │ 2026-10-17
proof-dpia-551765   │ draft  │ 1       │ 2026-10-16
proof-dpia-0271fc   │ draft  │ 1       │ 2026-10-15
proof-dpia-238c01   │ draft  │ 1       │ 2026-10-15
proof-dpia-6218bb   │ draft  │ 1       │ 2026-10-15
proof-dpia-8ffd12   │ draft  │ 1       │ 2026-10-15
proof-dpia-1fd422   │ draft  │ 1       │ 2026-10-14

• No real DPIAs: None of the names describes a real activity such as customer data or
  voice calls. The "proof-dpia-" prefix and the random hex suffixes point to automated
  proof runs.
• Nothing approved: None has been submitted for approval. If you do process personal
  data with AI, as the DPIA guidance says GDPR Article 35 requires [K2], you have no
  completed assessment on record.

I'd tidy this by archiving the proof drafts and starting real DPIAs for your actual
processing, such as voice calls and contacts. I can't see a delete or archive option in
my read access, so I'd need to look up the right command for that. Shall I?

Sources: [K2] Data Protection Impact Assessment (DPIA)

17.2s · 1 tool · 0 approvals

A real turn on our own install (CLI 0.5.0, 6 Nov 2026), replayed at speed. Names changed. Type the same words into quox.
✔ Machine verified against the CLI on 6 Nov 2026 · test report mw5epd

Quox read your compliance records, listed each DPIA by its processing activity and status, and pointed out that none had moved past draft.

dpias
quox tool exec compliance_read --args '{"artifact":"dpia"}' | jq -r '.dpias[] | [.processing_name, .status, .version] | @tsv'proof-dpia-6218bb	draft	1proof-dpia-8ffd12	draft	1proof-dpia-1fd422	draft	1proof-dpia-seed	draft	1
From a real run on our own install, on its test records.

quox tool exec runs the same governed tool Quox used, under your own login.

Change artifact to read a different kind of record from the same tool. "artifact":"soa" lists the ISO 27001 Statements of Applicability you hold.

Quox read your organisation’s compliance records with your permissions. Reading changes nothing, so no approval was needed.

Leave off the jq part in step 1 to see each DPIA’s id and its created and updated times, read straight from your own install.

Reading needs no undo.